Dracarys Medium Big Green Egg Nest,Big Green Egg Accessories,Stand for Big Green Egg,Grill Rolling Nest With Heavy Duty Locking Caster Wheels Powder Coated Steel For Medium Big Green Egg

what our customer say this product:

Powered by

1. Jeff A. Verified Buyer – 2 October 2024

   I was very impressed with how sturdy this stand was. Easy to assemble and rollers worked well. I really liked the ability to lock the wheels in place. Fit my Big Green Egg Mini Max perfect! Cost seemed a little high but you get a great product. Would definitely recommend to others.
   

2. Patrice Stange Verified Buyer – 7 October 2024

   Item was easy to put together. MiniMax fits great.
   

3. RGS Verified Buyer – 19 November 2024

   Fits Kamado Joe JR perfectly…Slightly challenging to put together(keep all parts loose before final tightening) but once assembled works great -Only issue with it was it needs to be about 6-12″ higher -sits slightly lower than hip level and still requires some stooping(Im 5’8″) but is better than the stand it came with!

   

4. MSDS Verified Buyer – 13 February 2025

   The cart is very sturdy and well made with smooth rolling casters. Manufacturer supplied an extra piece of each of the 3 hardware units needed (13mm bolt, 13mm nut, and 18mm caster nut). Manufacturer also supplies two stamped out wrenches that are adequate for minor tightening, but they are insufficient to fully cinch it down. I had a 13mm wrench and sockets in my kit, but had to use a crescent wrench to tackle the four larger 18mm caster bolts, but that was fine. Re: assembly, my advise would be to hand tighten all parts to snug, but wait to cinch it down until it’s all assembled. Pay attention with the two pair of crossing brace pieces to insure they are oriented with the flat bar (that has the square carriage slot in it) on top each time laying across the u-shaped bar. Once it’s all assembled, you see there is some “play” in the cart that you have to attend to as you do the final tightening. Having a second person to help hold the parts in position as you cinch it down is very helpful. We flipped the cart upside down and found tightening from bottom to top worked best. Casters first, you’ll find that as the nuts tighten, the bearing races on the caster will start to spin. Since you can’t get a tool in there to grab the nut on the caster, we used a pair of water pump (channel lock) pliers to grab the caster as the nut was tightened. Once the casters are secure, flip the cart and then pay attention to maintain the braces in a perpendicular position as you tighten those two nuts finishing with the 4 upper bolts. When it’s time to move the Kamado, removing all the internal ceramic parts make it lighter to handle. The fit is snug so pay close attention to the position of the lower vent door and the arms of the cart. It actually required some force to press the Kamado fully down into the cart, but since it’s very secure once it’s in place that’s a good thing. I included 2 pictures. One shows the Kamado next to the metal stand the Joe Jr. comes on. The stand places the bottom of the Kamado 5 inches off the ground. On the cart, the bottom of the Kamado now sits 18 inches off the ground, with the grill surface at a comfortable 28 inches off the ground for grilling. It’s easy to move on the casters now. Manufacturer recommends pulling it by the handle, rather than pushing it. My patio has a joints with brick inserts, and the casters slip over the joints smoothly and easily. This turns the Kamado Joe Jr. into a very nice bbq for cooking up to 6 people. I’ve done chicken, tri tip, steaks, pork butt, even ribs to serve 6. For me the small unit is perfect. I didn’t want a 200 pound bbq (like the classic) when I mostly cook for small groups. Adding easy portability, means I can position it anywhere on the patio for use, and then easily return it to a rain protected spot under the eaves.

   

5. jamie Verified Buyer – 4 March 2025

   Didn’t take long to put together and is very heavy duty. The wheels work great and so do the wheel brakes. So far so good! Nice to have the minimax at a height you don’t have to kneel down to use!
   

6. Alexander Andrade Verified Buyer – 13 March 2025

   Perfect for my BGE mini max. Very easy to assemble. Might need two people on some assembly but I did it by myself. Great product. Would highly recommend.

   

7. Shawn Verified Buyer – 21 March 2025

   Easy to put together and the mini-max BGE fit perfectly. Would highly recommend.
   

8. MMM Verified Buyer – 25 March 2025

   this was easy to set up, it might have taken me 15 minutes. It’s not some flimsy stand that will fall over in a light wind. It’s sturdy and well-matched to the weight of the Egg. Make sure you buy the right size and you’ll be very happy. Some of the larger models (I have the Minimax) can also add work areas on either side but I don’t think you can do that with this model.